Sealants can take 4 to 12 hours to dry before you can run them over them, but they will continue to harden for up to 48 hours after application. Concrete sealed with an acrylic sealant should not be stepped on (except if a coating layer is applied), and should not be driven on or wet for at least 36 to 48 hours. This will vary depending on the type of paving stone, but in some cases, pavers will increase in brightness. Enviro Clean & Capture offers a free, no-obligation quote for paving stone sealing, so you can understand exactly how much it will cost depending on your particular situation.
The additional weight of cars and foot traffic can affect the sealant's ability to seal the paver, which otherwise feels dry to the touch. Sealing is an effective way to protect pavers from the stress they suffer with general use and the elements. The number one problem when it comes to a paving stone sealant going bad is not using the right sealant for your pavers. We recommend that, as a general rule, most types of sealants be completely safe to step on after 12 hours, so if you can allow the paver to spend more time sealed, we recommend that you do so.
Buying your own sealant at local hardware stores such as Lowes or Home Depot to seal your pavers is not a good idea and can often cause irreparable damage. This process requires a chemical to impregnate and seal pavers and there are many different types of sealants to choose from. If you really want to care for your property and ensure the longevity of your pavers, talk to the Enviro Clean & Capture team of experts for the best paving stone sealing Sydney has to offer.
