Use water-based sealants instead of solvents. Yes, you can use a standard garden sprayer as a paving stone sealant. This is the same type of sprayer that can be used as an insecticide or fertilizer. And, for certain types of sealants, a standard garden sprayer can work perfectly, as long as it has a sprayer tip with an adjustable fan that offers the ability to adapt it to the consistency of the sealant.
Not only will it allow you to apply more sealant for a longer time, but it's also built with a metal housing so it can withstand more types of sealants. This alone makes it a much better option for your pavers sealing needs. Knowing how to apply a paving stone sealant will help protect your investment by giving paving stone surfaces a beautiful, durable finish. Once the pavers are completely clean and have dried for several days, a new paving stone sealant can be applied.
In addition, the best paving stone sealants help prevent stains and the growth of mold and mildew on paving stone surfaces by blocking the pores of pavers, which would otherwise harbor dirt and debris. A paving stone sealant will not adhere properly to the substrate that has puddles or pits, and the paving stone sealant will not adhere properly if the surface is dirty. The downside of using a two-part water-based urethane to seal pavers is that they are more expensive. A water-based sealant, such as Seal RX, will give the paver or concrete a natural look without tarnishing the sand in the joint.
Concrete pavers are manufactured by many paving stone manufacturers, such as Tremron or Belgard, all over the world. The SealThane sealant, sometimes called acrylic urethane paving stone sealant, offers a simple application and provides a wet appearance, profoundly improving the color of the pavers. Climates with high humidity or heavy rainy seasons, such as South Florida, should wait for the pavers to dry completely before applying the paving stone sealant to the substrate. Water-based paving stone sealants can be applied at temperatures as low as 50 degrees Fahrenheit; however, sealants containing solvents for paving stone sealants should not be applied when the temperature is lower than 40 degrees Fahrenheit.
The application of the paving stone sealant is usually done by pressure cleaning the surfaces to be sealed and allowing the surface to dry. A water-based paving stone sealant is non-toxic and environmentally friendly compared to solvent-based paving stone sealants. To protect pavers and joints, seal them with a high-quality sealant after the polymer sand cures (about 30 days). When pavers discolor or discolor due to a reaction to sunlight and UV rays, wet-looking paving stone sealants will also reduce efflorescence.
Apply a Wet Look cobblestone sealant for greater protection against stains and discoloration, the darkening of stony materials, and even to add shine and shine to darker paving stone materials.
